Design For Make A Waterbed Frames

Author: | Categories: Bed Frame Ideas comments
DIY Waterbed Frames

Waterbed frames – Without a frame, your waterbed be a wild ride on a bag of water. A frame gives your water mattress support and brings stability to the bed. Before even starting to build your frame, buy water mattress you want. This way you can ensure that your frame is a custom fit.

Take measurements of your water mattress. You want to know the width, length and height of the mattress when it is filled with water. Using these measurements, and add 3 inches on each side to allow for the thickness of the frame walls and a half an inch to the height of the mattress in order to take account of the thickness of the base. Mark off the dimensions of your waterbed frames on a piece of sheet wood. This will form the basis for your frame. Cut sheet tree to your dimensions.

Cut two pieces of 3-inch-wide wood for the length of your pages. Cut two pieces of 3-inch-wide wood to the width of your frame minus 6 inches. Participate in the wood pieces to form the walls of your frame. Drill a whole ΒΌ-inch diameter through the two timbers to be joined. Cut the dowel into 6-inch lengths. Apply glue to the top of the frame all the way around it. Load the sheet tree on top of your rectangular frame. It should match up with the same dimensions. Terminal sheet tree to the frame, and let it dry. Mark a line 1.5 inches from the edge of the sheet tree. Each 7 inches along this line, sinking a wood screw until it is flush with the sheet tree. This will ensure the sheet timber to the waterbed frames.

Best Post |  Full Size Trundle Bed Frame and Bunk Bed

Comments are closed.