Platform Bed From A Twin Metal Bed Frame

Author: | Categories: Metal Bed Frame comments
Twin Metal Bed Frame Style

Twin metal bed frame – A platform bed has a raised design that reduces the need for a box spring. The platform base is strong and sturdy enough to support the mattress and prevents sagging. If you need more support or a higher bed, use a box spring in combination with the mattress. Crafting a double bed from a metal frame, use the platform on top of the frame. The frame adds additional support while the platform elevates the height of mattress.

Build a Platform Bed from a twin metal bed frame, Make platform from two boards measuring 39 inches by 10 inches by 1 inch and two boards measuring 75 inches by 10 inches by 1 inch. Add the boards in a rectangular shape, which makes a big box. The sides measuring 75 inches, the top and bottom measure 39 inches and the box must be 10 inches high. Apply wood glue to the edges of each table and press the boards together. Place a 1 ½ – inch wood screw at a corner where the two panels meet.

Arranging ten 39-by-2 -by- -2- inch wooden boards at the top of the platform. Drill holes through the Platform Bed from a twin metal bed frame. Space the holes across every page, making a hole every 2 inches. Turn the platform frame upside down so that the support side touching the floor and place metal frame on top. Attach wood screws through each hole in the Platform Bed from a twin metal bed frame. Tighten the screws until each sits flush with the metal. The screws holding the bed frame to the platform. Turn the bed head again and put the mattress on top of the platform.

Best Post |  Metal Bed Frames Queen Styles

Comments are closed.